Kodewerx
https://www.kodewerx.org/forum/

PokeSav - Now With Platnium Support!
https://www.kodewerx.org/forum/viewtopic.php?f=2&t=1812		 Page 1 of 15
Author:  Link2999 [ Sun May 06, 2007 6:59 pm ]
Post subject:  PokeSav - Now With Platnium Support!
This is not my program so I do not take any credit in making it and I am not responsible for anything that happens to your game while you use it.


Platinum
US Output (Updated) - http://www.filedropper.com/pokesavpla-eng-pporg
US/Jap Language Pack - http://www.powertotheplayers.org/downloads/pokesavplat_005.zip
---------------------------------------------------------------------------------------------------------------

D/P
US ARDS Output - http://rapidshare.com/files/49598187/PO ... t.exe.html
UK ARDS Output - http://www.uploading.com/files/3LX4H69M ... t.exe.html
French ARDS Output - http://rapidshare.com/files/49598623/PO ... t.exe.html
German ARDS Output - http://rapidshare.com/files/49598968/PO ... t.exe.html
Italian ARDS Output - http://rapidshare.com/files/49599189/PO ... t.exe.html
Spanish ARDS Output - http://rapidshare.com/files/49599453/PO ... t.exe.html
Japanese ARDS Output - http://rapidshare.com/files/49614535/PO ... t.exe.html
---------------------------------------------------------------------------------------------------------------


MAKE YOUR OWN POKEMON

1. Open the application.
2. Go to the lower right area and click on EDIT under the words "Storage."
3. Select any box you want the Pokemon to end up in. (I use Box 1 slot 1 to avoid confusion and erasing any Pokemon)
*Make sure you have no Pokemon in the box you've selected*
4. Click the EDIT box to the right of the box you've selected.
5. From then you select the Pokemon you want and abilities. (Far too much detail to go into but all in all it shouldn't be difficult.)
6. When finished press OK to go back to the "Storage" window.
7. Press OK out of that, then select the ARDS OUTPUT button.
8. Select which box you put your Pokemon in and select the slot you put the Pokemon in when you edited it. (for example: You edited a Box 1 in Slot 1 to create a Pokemon. When you go to AR DS OUTPUT select BOX 1 and check off Slot 1.)
9. After your finished go to Save File and it will save it as a XML File which you can drag onto the ARDS application that can with your ARDS.
10. It should appear in your custom codelist as "POKESAV codelist" then tick the little plus next to it to bring down two different games, Pokemon Diamond and Pokemon Pearl (use the version you have.)
11. Drag the game either to another custom codelist or leave it, then connect your NDS and drag the new code to the NDS.
12.Wait for the ARDS to write the new codes....wait.....done! Congrats! Now all you have to do is Press L + R to activate the codes and your done!



Doing other things with this program is possible (including making your own codes), but not recommended if you don't have the experience.
Author:  darig0n [ Sun May 06, 2007 7:01 pm ]
Post subject: 
so those codes work for the english pearl?
Author:  Metal Overlord [ Sun May 06, 2007 7:14 pm ]
Post subject: 
Quote:
10. It should appear in your custom codelist as "POKESAV codelist" then tick the little plus next to it to bring down two diffrent games, Pokemon Diamond and Pokemon Pearl (use the version you have.)


And yes, it is for the US version.
Author:  darig0n [ Sun May 06, 2007 7:23 pm ]
Post subject: 
awsome is there a uh shiny code
Author:  Andarel [ Sun May 06, 2007 7:24 pm ]
Post subject: 
This code is for the AR DS or Max (it's for the Code editor, not the Savefile editor, correct?)

So it works like this: Select an empty box, and it outputs a code that allows you to create a selected custom pokemon in a slot there? O_o
If so, freaking awesome.
If not, I'm confused...
Author:  Latency [ Sun May 06, 2007 11:29 pm ]
Post subject: 
been using this app with my r4 for a while, its awesome.
Author:  Mewy [ Mon May 07, 2007 7:22 am ]
Post subject: 
I'm using that to make my dream team, using my SC save...
Author:  Master SL [ Mon May 07, 2007 9:08 am ]
Post subject: 
I have been doing the same as Mewy except with OU pokemon that I used to have on netbattle.
A Snorlax with over 400 speed is quite a scary thing no?
Author:  pokewiz99 [ Mon May 07, 2007 9:11 am ]
Post subject: 
Dude haven't used that yet (my laptop has a virus and can't use Mom's computer yet...), but that is the coolest!!! I envy you link!
Author:  Viro [ Mon May 07, 2007 9:32 am ]
Post subject: 
It's a really good program but i'm having issues with making certain event Monsters reappear (for instance Rotom & Spiritomb). I'm unsure how to get the event flags to work. I go to the ARDS output but it doesn't show an option to activate the Event again. anyone know?
Author:  KingMengHuo [ Mon May 07, 2007 11:45 am ]
Post subject: 
yes it does.
Author:  Viro [ Mon May 07, 2007 12:41 pm ]
Post subject: 
I figured it's there. I'm probably misreading it as something else. Would you know the exact option it says so I can reactivate the event Flag? All I see under Event codes is Mining Museum Pokemon, Day-Care Egg(last g in Egg is cut off midway), Leauge Badge & Random Encounter Pokemon. Is it one of those 4 options?
Author:  Smalls1652 [ Mon May 07, 2007 1:27 pm ]
Post subject: 
1. Omg, use mega-upload, that is horrible, I'm talking about the ads

2. I have this but it's too big for my screen, any way how to get past this with having to switch my resolution
Author:  kittyprincess66 [ Mon May 07, 2007 2:39 pm ]
Post subject: 
Nope sorry smalls, this is the only way it works. There is a spanish version that fits the screen nicely. Habla? But it only exports JAP AR codes. But you can port them or open the file in the TOO BIG FOR SCREEN english version to output AR for US.
Author:  mrbadboy3 [ Mon May 07, 2007 4:14 pm ]
Post subject: 
Lol I'm new to this forum, but I'm a master with Pokesav. Yes, IT CAN GET SMALLER. To fit nicely. You MUST install JPN Unicode. The Program Will be in English without it and with it. But without the Unicode the program WILL be too big to use.
Author:  valin24 [ Mon May 07, 2007 4:19 pm ]
Post subject: 
Can you simply put them in by hand?
Author:  darig0n [ Mon May 07, 2007 4:21 pm ]
Post subject: 
if you mean the codes yes you can...
Author:  valin24 [ Mon May 07, 2007 4:22 pm ]
Post subject: 
Can thanks,would I put them under my Pokemon Pearl?
Author:  darig0n [ Mon May 07, 2007 4:24 pm ]
Post subject: 
uh im not so sure but input the codes manually by using touch screen on pokemon pearl codes
Author:  valin24 [ Mon May 07, 2007 4:24 pm ]
Post subject: 
Okay,thanks for the help.
Author:  darig0n [ Mon May 07, 2007 4:28 pm ]
Post subject: 
no problem.the only reason i didnt test the code is because the sav editor does basically everything those codes do and more.
Author:  valin24 [ Mon May 07, 2007 5:24 pm ]
Post subject: 
How do you activate the codes?Oh is their a master code for just these codes?
Author:  EvilDruidNE [ Mon May 07, 2007 5:32 pm ]
Post subject: 
hey guys are your pokemon created by this program coming up with the same weird thing as me, basicly on the summary screen from pokemon created with this it says "apparently caught on route 200" or whatever route, but it says "apparently". is there a way to fix this? it basicly makes it known that it is hacked normal pokemon dont say that
Author:  Ub3R H@<K3r [ Mon May 07, 2007 6:21 pm ]
Post subject: 
Man truly awesome. Nice find, ive noticed most of the codes have been posted but somtimes I cant connect to internet to look and this will be my only way of getting cheats.

Two thumbs way up!
Author:  KingMengHuo [ Mon May 07, 2007 6:31 pm ]
Post subject: 
EvilDruidNE wrote:
hey guys are your pokemon created by this program coming up with the same weird thing as me, basicly on the summary screen from pokemon created with this it says "apparently caught on route 200" or whatever route, but it says "apparently". is there a way to fix this? it basicly makes it known that it is hacked normal pokemon dont say that


it needs to have your OT ID, OT Secret ID, OT Name and OT Gender

if you don't know how to work out the secret code issue after looking in the D/P sticky, you don't have the deductive reasoning skills needed to play the game; so i don't see why this would matter anyways. "normal" pokemon say that when traded.

P.S. use punctuation, douchebag :!:

Ub3R H@<K3r wrote:
Ub3R H@<K3r


ki11 y0ur531f d00d l0l!1 :D
Author:  kittyprincess66 [ Mon May 07, 2007 6:55 pm ]
Post subject: 
mrbadboy3 wrote:
Lol I'm new to this forum, but I'm a master with Pokesav. Yes, IT CAN GET SMALLER. To fit nicely. You MUST install JPN Unicode. The Program Will be in English without it and with it. But without the Unicode the program WILL be too big to use.


Fuck yeah! Thank you! I stand corrected this works with JPN Unicode installed. (Not too much more to see but it works great and is much nicer to look at thank you for posting)
Author:  sandman423 [ Tue May 08, 2007 12:30 am ]
Post subject: 
JPN Unicode to English Where do I get this Program??

I can't seem to get this to work...I WANT THIS POKEMON for US Pokemon Diamond...

Weavile (Adament By Nature)(Hatched From EGG)(OT Name: Shade)(ID No. 28407) (Box 14 Slot 01)
MAX IV's (EVs 255 in Attack and 255 in Speed)

::Moves::
Night Slash
Brick Break
Ice Punch (EGG MOVE)
Aerial Ace

I Just want that..Can't seem to get it to work with PokeSav and AR DS...I Pushed L + R Before entering the Computer...In_Game...

Please Post the US AR DS Code for me or explain how to get this to work please...
Author:  Vosenbergen [ Tue May 08, 2007 4:46 am ]
Post subject: 
sandman423 wrote:
JPN Unicode to English Where do I get this Program??

I can't seem to get this to work...I WANT THIS POKEMON for US Pokemon Diamond...

Weavile (Adament By Nature)(Hatched From EGG)(OT Name: Shade)(ID No. 28407) (Box 14 Slot 01)
MAX IV's (EVs 255 in Attack and 255 in Speed)

::Moves::
Night Slash
Brick Break
Ice Punch (EGG MOVE)
Aerial Ace

I Just want that..Can't seem to get it to work with PokeSav and AR DS...I Pushed L + R Before entering the Computer...In_Game...

Please Post the US AR DS Code for me or explain how to get this to work please...


The save editor spits out the japanese ARDS code, you have to convert them....not sure of the exact conversion, though
Author:  sandman423 [ Tue May 08, 2007 10:10 am ]
Post subject: 
Does Anyone KNow how to convert the Code to the US Version of Diamond?
Author:  KingMengHuo [ Tue May 08, 2007 10:42 am ]
Post subject: 
sandman423 wrote:
Does Anyone KNow how to convert the Code to the US Version of Diamond?


94000130 fcff0000
b21c4d28 00000000

:roll:
Page 1 of 15 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/