i just need some help on how to build a universal ds charger and yes i searched google and instructables.com. what I'm thinking of is a 3 way switch something that splits the electrical current into 3 currents and you select which one you want to use something like this
ASCII picture
Attachment:
Screenshot-2.png [ 2.81 KiB | Viewed 4495 times ]
doing that and use a different pcb board or bread board for each adapter using voltage regulators and capacitors and diodes and a master switch(don't think i need one though) and whatever else i need.
also please excuse the diagram for not having +,- and, or ground. and also i don't have a lot of knowledge about circuit boards and the other stuff. only know how to use 2 or 3 pronged stuff any more will require a step-by-step(pin-by-pin) instructions on what goes where. and end with the appropriate plug or board that sticks right into the slot or wire with a plug coming from the ds and connect to the board. also i know that they use different voltages so just need help making the board and i am not good at all at reading the schematic drawings. thank you towards whomever tries to help and at the end of this posting i searched google again and found this but it doesn't tell you how to make it, its a pre-made product
http://www.buy.com/prod/nintendo-ds-uni ... 45657.html and this
http://www.dse.com.au/cgi-bin/dse.store ... uct/YG7556 can't find anything. searched insructables and found nothing
thanks for the correction parasyte
That's weird the ASCII drawing didn't appear correctly.
_________________
01101011 01101111 01100100 01100101 01110111 01100101 01110010 01111000 =kodewerx.
0110100001110010001000000110110001101001011011100110010100100000011101000110000101100111
The box said "Requires Windows 95, NT, or better", so I installed Fedora.