Kodewerx
https://www.kodewerx.org/forum/

Action Replay Help Thread
https://www.kodewerx.org/forum/viewtopic.php?f=17&t=1400		 Page 1 of 10
Author:  somedude [ Sun Apr 15, 2007 4:49 pm ]
Post subject:  Action Replay Help Thread
For help with trainer toolkit go to http://members.cox.net/dexter0/DSHacking/

For help with converting codes go to viewtopic.php?t=1291

Do not post here with stuff like, I got the pokemon event code, but when do I activate it, or any other codes that are single game related! (However, if the question is why won't the AR let me put codes in it, or will codes work if my AR is from a different country than the game, etc. Then it is OK)



What you currentlywill find in this thread (please tell me if you need help on another topic. Or if you have writen something and you want it in, post it/PM me and I'll edit it in and give you credit for it.)

1.Not having enough memory, or not being able to add any more codes
2.Resetting your AR
3.Adding codes manually
4.Adding codes without doing it manually
5.Adding a new subscription
6.The subscriptions won't load
7.How to create a floder
8.What happens if you toggle your folders to radio.
9.How to tell if folders are toggled to radio
10.Folders will only let one code be selected inside them
11.If your computer doesn't reconize the AR
12.Your AR was sent without a driver
13.If your mouse freezes when you go into the AR software
14.Un-passable white screen when you start up your AR
15.DS doesn't read AR
16.Where to find the games ID
17.Can I have codes from a different region than where my AR is from
18.Can I store games from multiple countries in the same AR
19.I can't select any/a code(s) in the AR software
20.How to make codes automatically be selected when you put your game in
21.The AR computer software says there a problem with the codes you’ve entered
22.How to update your Action Replay
23.How to update your computer software
24.How to create a backup code list.
25.How to add notes to your codelist
26.Screen turn white when you hit start
27.What do do if you keep on getting errors while connecting to a sub
28How to add a single code from Codejunkies Sub.



1. Not having enough memory, or not being able to add any more codes for some other reason(won't let you add codes)

Delete any codes/games that you don't want(I recomend deleting games you know you won't ever get, as this can make room for hundreds, sometimes even thousands of code space)

If this doesn't work then you should reset your AR(look below to see how)

Remember that if you auto update your DS it will put all the codes that you don't have onto your DS and delete all your codes that Codejunkies doesn't have in thier subscription, so don't do this, not to mention it will take up the memory space you just freed from you AR.


Source Somedude



2. Resetting AR

If you are having problems with your ARDS (like not being able to add codes) try to reset it by doing the following: (Note try to delete unnecesary codes first!)

1. With the console powered off, hold A+B.
2. Power up the console while still holding A+B.
3. As soon as the Nintendo screen is displayed, before our screen stating this product is not endorsed by Nintendo, press and hold Start and Select while keeping hold of A+B.
4. Continue to hold these buttons until the Main Action Replay screen is displayed, then release. Your product is reset, and will accept codes once more. ((*EDIT* from somedude) This will delete all your codes so you'll have to put all of them back on the AR)


Source Codejunkies


3. Adding codes manually

Update your AR so you have v1.52(if you have AR max you won't need to)

Then you can go into your game selection by hitting the green circle on the bottom-left of the touch screen. (Or just hit the green circle when you have your game in)Select your game, then select <add new code>. It will have you name the code, then hit next on the bottom-left of the touch screen. It will now have you enter the code, you can do this by typing all the numbers on the touch screen, when done hit next (on bottom-left of touch screen), and you have now entered your code into your AR.


Source Somedude



4. Adding codes without doing it manually


1. Open Code Manager.

2. Make a codelist in my codelists.

3. Drag a game into the codelist.

4. Right click add a new cheat.

5. Paste the code into the bottom box.

6. Name it in the top box.

7. Hit OK.

Source Somedude


this is for people who have no clue how to add codes to their ar without doing it manually, you do this under my codelists


((*EDIT* from somedude)you may have to update your computer software, do this by hitting software updates on top of the AR window)

and yes i have witnessed people not knowing how to do this:

first right click under my codelists and click add new game:

then after that add the game id (usually found on the game) and add game title
after that right click on the game title and press add new cheat:

after that add the game cheat and cheat title

after your done just drag it to the big box on the right and its now on your ds (if you dont understand this then you are hopeless)


Source IronJoey. (To see one with pictures go to viewtopic.php?t=1124)



5. Adding a Subscription


1. Copy a link. Lets say this one http://www.freewebs.com/nhsomedude/SUB.xml

2. Open you AR computer software.

3. Find top green box titled subsriptions

4. Find the paper with the + sign on it. If you hold your mouse over it, it says Adds A new Subsription Source.

5. Click it.

6. Paste the link into the box. (ctrl+v)

7. Hit OK.

8. Enjoy.

Source Somedude



i have also seen people not able to add a subscription because they dont know, so i decided to make a step by step guide
on how to do this:

first click add new sub:

then put in the subscription of your choice, you can find them here http://kodewerx.net/forum/viewtopic.php?t=1302 after choosing your subscription copy and paste it into the box

((*EDIT* from Ironjoey) to paste it you might have to press ctrl+v)

then click ok

after that there are tabs at the bottom, click the tab of the new subscription and choose your cheats:


this should help, and again if you dont get this...your stupid


Source IronJoey. (To see one with pictures go to http://kodewerx.net/forum/viewtopic.php?t=1124)


6. The subscriptions won't load

When codejunkies subscription says load failed it can be caused for many reasons.

1.Your firewalls.
2.Your internet was down when you tried.
3.Codejunkies is offline. This happens sometimes and can last up to 2 weeks.

Someone's subscription says load failed or can not connect.

If the computer says load failed it can be

1.Your firewalls.
2.Your internet was down when you tried.
3.Their website/subscription is down.
4.The subscription was re-located.

If the computer says can not connect, it can mean

1.You mistyped the link.
2.The source that you copied the link from typedit wrong.
3.The link isn't an XML file that the AR software can read.
4.The subscription was re-located
5.Your firewalls.
6.Your internet was down when you tried.
7.Their website/subscription is down.

If the computer says can not connect it might be one of the three above topics or you may have typed in the subscription in wrong/you didn't copy all of it.

Sorce Somedude



7. How create a folder.

In the AR window on the computer add a new codelist in my codelists. Go to your game (Hit the plus sign) and right click and the menu thing will come up displaying options. Select add a new folder and then all you have to do is drag your codes and put them into your new folder. (Once you drag your highlighted code over the folder and let go of it, it goes in the folder)


Sorce Somedude



8. What happens if you toggle your folders to Radio

When you toggle your folder to radio the folder only lets one code inside of the folder be activated at a time. So overall you don't want to toggle your folders to radio, but sometimes you may want to, for example if you have a always play as character folder, you don't want to accidently turn on more than one of these codes because it might freeze your game.

Source Somedude



9. How to tell if the folders are toggled to radio

On the computer software the folders will be circle, and on the AR on your DS the check marks will be circle, and the AR will also only let you select one code in that folder.

Sorce Somedude



10. Folders will only let one code be selected inside them

They are Radio folders. For more information on these folders look at the above two topics.

Souce Somedude



11. Computer doesn't reconize the AR

Quite a few of these things were shipped without drivers. You can upload them here I have posted them again.

Source kittyprincess66

Use a different USB port.

Source Somedude


Push the Cord into your AR so it clicks and goes up, then push it back in. (alot of times either the AR or USB cord aren't in all the way, when it feels and looks like they are.)

Source Somedude


Restart your computer with the AR plugged in and on the updating page.

Source Somedude


(Try this last)
First of all make sure that you installed the new software(USB-AR cord) If you did then re-innstall your CD disk. If it still doesn't work try a different usb socket. If this doesn't work re-install it while using a different usb socket.

Source Somedude



12. Your AR was sent without a driver

Quite a few of these things were shipped without drivers. You can upload them here I have posted them again.

Source kittyprincess66




13. Mouse freezes when you go into the AR software

Restart the computer with both the AR and mouse plugged in.

Source MIR



14. When you start up your AR all you get is an unpassable white screen

If you have a flashcart, then you can do the below.



1.) Ready your Flashcart for transferring files.
2) Download this: http://www.freewebs.com/xdite396rw/ards.zip and extract the .NDS file to your Desktop. (ARDS Frimware v1.00)
3) Open your Micro SD folder (Flashcart).
4) Drag/drop that .NDS file into your "Games" Folder of your SD card.
5) Let it finish.
6) When that is done, take your Micro SD out of your USB Port, and put it in your Flashcart.
7) Boot up your Flashcart.
8 ) Open the .NDS file we just transfered.
9) It should load like a ROM. (Regular Game File)
10) Then you see your old Action Replay DS screen.
11) Take out the Flashcart (Like a regular Action Replay when loading a game)
12) Put in the bricked AR.
13) You should still see the "Computer" symbol in your top-right.
13.5) Plug in your Action Replay to you computer, and open the "Action Replay Code Manager."
14) Hit that symbol, a pop-up should ask you if you want to download and send the newest Action Replay Firmware. Hit "YES" and download/send the firmware to the Bricked AR. (We tricked the system, so it thinks it is upgrading the Flashcart version of the ARDS.)
14.5) WARNING! Watch out for Protocol Errors. You will for sure get one. Then just retry. It should work. If not, keep on retrying. (I have done this to two of my ARDS's, and I know all this works.)
15) When that is complete, turn off your Nintendo DS.
16) Turn the Nintendo DS back ON, without taking out, pushing in, the (No longer) Bricked AR.
17) It SHOULD start, no longer unrecognized by the DS, or not giving you the "White Screen of Death."
17.5) Plug in your ARDS to the computer to send codes.
18 ) BUT! The Action Replay has the error that it's memory is full, without there being any codes on it.
19) Follow step "2." of the "Action Replay Help Thread" and reset your ARDS.
20) Now you are able to send codes to your "Unbricked" ARDS.

Credit to me for busting my hand for this, and Lemmayoshi for finding the ARDS files. The ARDS .NDS file is a ROM, so you can play it on a Nintendo DS Emulator, but it is useless.

http://youtube.com/watch?v=T6tQjI5mTM8
That is how you do it, but he wasn't to clear on what files you needed. Lemma and I fixed that. Enjoy.

Source xdite396rw


There is only ONE solution if you don't have a Flash Cartridge. This is BUY A NEW AR

Source Somedude




15. DS doesn't read AR

Same as unpassable white screen. Look above.



16. Where to find the Games ID

Look on the back of your game on the bottom to find the ID, it will be printed in black.

Or on your AR code manager if Codejunkies has created any codes for that game they will already have the game ID programed in their game, so just drag it to your DS and add custom codes by then dragging the game to your codeslist and adding cheats like normal.

Source Somedude


1. Insert Action Replay
2. Take out Action Replay and insert the game you want to find the ID for
3. In the middle box that moves across it should say unknown game
4. in the bottom left corner it will have letters and numbers copy that down and then when you add a game you put that for the ID

Sorce XD_bLaZe



17. Can I have codes from a different region than where my AR is from


Yes you can. The DS is region free.

Source Somedude



18. Can I store games from multiple countries in the same AR

Yes you can. The DS is region free.

Source Somedude



19. I can't select any/a code(s) in the AR software

1. Hit a on the code you want to activate and test to see if it works even if it doesn't show it is selected.
2. If that doesn't work go into the AR computer software and put the game into my codelists and if you have the updated computer software you can double click the code and it will come up with the numbers that the code uses, and type on right before them, this will make it so the code is automaticly activated when the game is put in.
3. If neither of the above two steps work put the code in again.

Sorce Somedude


20. How to make codes automatically be selected when you put your game in

1. Go into the AR computer software and put the game into my codelists and if you have the updated computer software you can double click the code and it will come up with the numbers that the code uses, and type on right before them, this will make it so the code is automaticly activated when the game is put in. (You will obviously have to drag the game into your AR as it will now have new information on it, and the computer can't send the information to the AR without the AR being pluged in and sent the new information.)
2. Go into the AR software while on your DS and at the main menu there is a blue wrench on the bottom right of the screen. Touch it and select Save Codelist Changes. From there hit the Yellow Home Button. Then take out your Action Replay (unless you have ARMAX, then you don't need to take it out.) Insert your game and click one the Green star on the bottom left of the screen. Select your codes in your game and then hit go. The words on the bottom of the top screen will then say Insert Action Replay and will be highlighted in red. Insert your AR and it will save the changes then it will ask you to insert game cart. Do this and the game will automatically load up with the codes on. From now on when you put your game in the Action Replay will have those codes selected. (If you have ARMAX you will not have to take out your AR as it will automatically save it to it since both the game and the AR are plugged in at the same time.)

Source Somedude


21. The AR computer software says there a problem with the codes you’ve entered

This means there is something wrong with the code you entered. By this I mean you made a mistake when you typed it in. The AR won’t know if codes will work or not. Basically when this message is displayed it means

1. There are symbols that the AR doesn’t recognize (AR only recognizes A-F, and 0-9)
2. There not enough spaces (most likely)
3. The lines are too long (each line has to be made up of two eight symbol sections.)
4. There are not enough eight section parts to it (there must be an even amount.)

For example the codes below WON’T work.

12345678.12345678
12345678 12345678 > The code to the left won’t work because there is a symbol the AR doesn’t recognize (period after the first eight.)

12345678 1234567G
12345678 1234567F > The code to the left won’t work because there is a symbol the AR doesn’t recognize (G at the end of the first line)

1234567812345678
12345678 12345678 > The code to the left won’t work because there is not a space after the first eight.

123456789 12345678
12345678 12345678> The code to the left won’t work because the first line is to long. (There are 9 symbols, not eight,)

12345678 12345678
12345678 > The code to the left won’t work because there are not enough eight sections. (There has to be an even number of eight sections)

Sorce Somedude



22. How to update your Action Replay

1. Put your AR in your DS.

2. Turn your DS on.

3. Hit the mouse on the top right of the main menu, which will take you to the updating menu.

4. Plug your AR USB cord into the AR and into the Computer.

5. On the computer open up the AR software.

6. On the top right of the AR computer software there is a shape that looks like an AR. If you hold your mouse over it it will say Software Upgrade. Click on it and it will ask you if you want to upgrade your AR software.

7. Click yes and your AR will be upgraded.


This upgrade will let you manually type in codes. To learn how to do this look up top under how to add codes manually

Source Somedude



How to update the computer software

1. On the computer open up the AR software.

2. On the top right of the AR computer software there is a shape that looks like an AR. If you hold your mouse over it it will say Software Upgrade. Click on it and it will ask you if you want to upgrade your computer software

3. Click yes and your Computer software will be upgraded.

This lets you copy and paste codes to your AR. Look above in the topic named How to add codes without doing it manually to see how to add the codes by copying and pasting them.

Source Somedude



24. How to create a backup code list.

You can create a backup codelist many ways. The easiest is to save your codelist to My Codelists. To do this

1. Turn on your AR and have it on the updating page.

2. Go into the computer software and just drag your codelist to My Codelists.

*note*
I recomend that you just drag over the games that you have custom codes over, because when you have alot of games it'll take a long time to transfer, and if you lose games that don't have any custom codes it won't matter if you accidently delete them as you could always just take them off of codejunkies.


You can also create backups on CDs and Flashdrives. To do this

1. Turn on your AR and have it on the updating page.

2. Go into the computer software and drag your codelist to My Codelists.

3. From here drag your codelist to your computer desktop. (or a folder) The codelist will now be saved as an XML file.

4. From here you can burn it to a CD just like you would burn anything to a CD, or if you are using a flashdrive just drag it into it.

*note*
I recomend that you just drag over the games that you have custom codes over, because when you have alot of games it'll take a long time to transfer, and if you lose games that don't have any custom codes it won't matter if you accidently delete them as you could always just take them off of codejunkies.

Sorce Somedude



How to add notes to your codelist

It is pretty easy to add a note to your AR codes.

1. Open up the AR computer software.
2. Make your window small enough, that you can still see the desktop/folder.
3. Have the game that you want to add note(s) to in its own subscription. (This is not . necessary, but it makes it easier to find the codes.)
4. Drag your codelist with your game that needs note(s) onto the desktop/folder.
5. Open Notepad.
6. Go to File Open
7. You will notice that the XML file won’t be there, to make it appear go to file type . on the bottom of the window and change it to all files. You will now be able to . select it.
8. Hit Open.
9. Scroll to the code that you want to attach the note to.
10. You will see this
<name>code name</name>
<codes>code</codes>

All you have to do to attach a note is make it look like this

<name>code name</name>
<note>type in your note</note>
<codes>code</codes>


Please note that you must make the <note>xxx</note> part line up with the <code>code</code> like my example above.

Source Somedude

26. Screen turn white when you hit start

If it doesn't work, then most of the time one of your codes is a bad code that doesn't work. So try going through all your activated codes that were on to find the bad one. Do this by going through the codes one by one with only that code activated a see what hack is messed up.

If this doesn't work because all of your codes work, then try not activating so many codes. That could be another problem you're having.

Source Somedude


27. What do do if you keep on getting errors while connecting to a sub

1. Type in the URL of the sub, or click on the link.
2. Go to file, and then click Save As.
3. Save it to your desktop.
4. Open the AR computer software.
5. Drop the codelist into My Codelists
6. The Sub is now in your AR computer software.

*note*

If the sub is up-dated it won't be up-dated on your computer, becasue it isn't attached to the internet once it is in My codelists.

Source Somedude


28. How to add a single code from Codejunkies sub.

1. Make a blank codelist in my codelists.

2. Drag Codejunkies game over to it.

3. Have your codelist of that game in a seperate codelist in my codelists.

4. Hit the plus sign on the games to display the codes.

5. Drag the desired Codejunkies code into your game.

Source Somedude




If you think I should add another thing just tell me, and I will, or if you type something up I will add it, but give credit to you. And if you find any mistakes tell me and I will add it in and put ((*EDIT* by yourname) Information you gave me)


I'll keep adding new info into this thread, so check back later and I might have new info in here. If you find any mistakes tell me in this thread, I won't mind I've already edited it 81 times



If you still have questions post here, and not in a new topic
Author:  Dualscreenman [ Sun Apr 15, 2007 6:04 pm ]
Post subject: 
Stickied.
Author:  somedude [ Sun Apr 15, 2007 6:43 pm ]
Post subject: 
Sweet my first sticky :D :!: I hope this thread helps
Author:  Paradox [ Sun Apr 15, 2007 7:10 pm ]
Post subject: 
What happens if your AR is not reconized by the PC? Ive tried countless times to get it to connect, and with no luck. Any suggestions there?
Author:  somedude [ Sun Apr 15, 2007 7:34 pm ]
Post subject: 
Have you re-installed the disk? If not try, and if it still doesn't work try a different usb socket. If this doesn't work re-install it while using a different usb socket. Mine use to do this. When I get access to a computer I'll add this to top.(using wii currently)(Takes too long with wii, and too many words for wii)

What do you mean by it doesn't reconize it? Tell me and I might be able to help you more.

*EDIT* have you installed the new hardware?(USB-AR cord)
Author:  SithViperX [ Mon Apr 16, 2007 2:21 pm ]
Post subject: 
You should add that the white screen of death = no more AR
Author:  somedude [ Mon Apr 16, 2007 2:32 pm ]
Post subject: 
Oh yeah, thanks (origionaly I was only going to post problems that have solutions, but alot of people ask this.
Author:  kittyprincess66 [ Mon Apr 16, 2007 8:12 pm ]
Post subject:  Check Drivers
Quite a few of these things were shipped without drivers. You can upload them here I have posted them again. Paradox I think this may be your problem.
Author:  IronJoey27 [ Mon Apr 16, 2007 9:08 pm ]
Post subject: 
@somedude (*EDIT* From Some Dude, sometimes it won't let you paste it into it so just rename your bottom codelist the website by pasting it into that and then typing in that info. *END EDIT*) there is an easier way just push ctrl+v same thing as pasting :D if you didn't already know
Author:  somedude [ Tue Apr 17, 2007 1:55 pm ]
Post subject: 
I took that part out and put push ctrl+v

I also added what kittyprincess66 said
Author:  IronJoey27 [ Fri Apr 20, 2007 4:42 pm ]
Post subject: 
ooo for unpassable white screen put DS not able to read ards also and yet again put buy new ar, it happend to me
Author:  kittyprincess66 [ Sat Apr 21, 2007 11:53 am ]
Post subject: 
This is looking good somedude! It should cut down on the threads in 911, and Game Hacking and everywhere else. If people can't get it from this guide they never will!!!!!!!!!!!!!!!!
Author:  somedude [ Sat Apr 21, 2007 1:35 pm ]
Post subject: 
Thank you.



P.S. I can`t add anything at the monent though, because my computer monitor is broken, and my wii can't handle all the words on the first post, so I'll add/edit later.
Author:  The Ancient [ Sat Apr 21, 2007 2:16 pm ]
Post subject: 
Could you also add that the AR is not Vista compatible (?). I have Vista and load up the AR and it doesn't load the Nintendo DS list. Kinda made me disappointed.
Author:  haxor [ Sat Apr 21, 2007 4:52 pm ]
Post subject: 
this is what happenes when i click a certain folder on my Code Manager... Please help

Image
Author:  +++NdsH4ck3r [ Sat Apr 21, 2007 6:53 pm ]
Post subject: 
i also have a question: my computer recognizes my ar, but sometimes, when its loading the table of contents, it goes back to waiting for ds, then baq to loading contents, and then usually says either runtime error or the program has unexpectedly quit, ive tried putting in different slot but still happens... i mean i can transfer the codes fine if i try enuff times, but its just annoying that the program keeps quitting.
Author:  haxor [ Sat Apr 21, 2007 7:35 pm ]
Post subject: 
yeh the runtime really annoys me because i had all the codes i have saved up and made a suber MPH game and now i cant get into it...
i have un installed and re installed it 3 times now and it still comes up
Author:  somedude [ Sat Apr 21, 2007 10:25 pm ]
Post subject: 
haxor wrote:
this is what happenes when i click a certain folder on my Code Manager... Please help

Image



What does that say?(My tv is horrible with text (using wii))


@+++....... Have you re-installed the disc.


(Is anyone other than theancient having vista AR problems?)





P.S. can`t add anything to top for a couple of days because my comp. monitor is broke, and wii can`t handle all the words up top.
Author:  HyperHacker [ Sat Apr 21, 2007 11:08 pm ]
Post subject: 
That image doesn't actually link anywhere.
Author:  somedude [ Sat Apr 21, 2007 11:10 pm ]
Post subject: 
I noticed that to.
Author:  haxor [ Sun Apr 22, 2007 4:44 am ]
Post subject: 
ohhh...... it says something about runtime or something
Author:  AcezWylde [ Sun Apr 22, 2007 4:44 pm ]
Post subject: 
Forgive me for sounding n00bish, but what and where exactly is the Game ID? I'm looking around for mine for my Pokemon Pearl...
Author:  somedude [ Mon Apr 23, 2007 1:06 pm ]
Post subject: 
AcezWylde wrote:
Forgive me for sounding n00bish, but what and where exactly is the Game ID? I'm looking around for mine for my Pokemon Pearl...


look on the back of your game on the bottom, or on your AR code manager if Codejunkies has created any codes for that game they will already have the game ID programed in their codes, so just drag it to your DS and add custom codes by then dragging your codes to your codeslist and adding cheats like normal.


As for the runtime error, I have no clue, and if any one has a solution post it and I'll put it into the top with credit to you. (I guess you could always keep trying it. This has never happened to me.)


Can someone with Vista and AR tell me if the AR software doesn't work on Vista, becasue I thought my friend had Vista, and his AR software works fine. (I could be mistaken though)
Author:  Parasyte [ Mon Apr 23, 2007 3:59 pm ]
Post subject: 
STOP CHANGING THIS THREAD'S TITLE TO CLAIM OFFICIAL! We are not CodeJunkies, therefore we are not an official authority for any Datel product. OK? OK.
Author:  wiifan911 [ Mon Apr 23, 2007 4:19 pm ]
Post subject: 
my ar is unpassable white screen and can i send my ar to datel to get a free new one? because its only like 3weeks old..
Author:  Illusion [ Mon Apr 23, 2007 4:23 pm ]
Post subject: 
Doubt Datel will even respond, try resetting the firmware.
Author:  sekwaF yuG [ Tue Apr 24, 2007 1:47 pm ]
Post subject: 
When I put my AR into my DS or anyone elses DS it says "touch the touch screen to start" and it says theres no DS card in the ds. Ive cleaned the brass things on the ar and blown in the ds and everything i really dont wanna buy another does anyone have any ideas? Ive only had it for like 2 or 3 weeks if that!!!
Author:  lemmayoshi [ Tue Apr 24, 2007 1:49 pm ]
Post subject: 
It's broke. Send it back to Datel for repair.

PS: KODEWERX IS NOT DATEL TECH SUPPORT!
Author:  chimcharman [ Tue Apr 24, 2007 3:14 pm ]
Post subject: 
I'm missing the driver for the AR cable

(also is the AR supposed to have 5 little prongs inside of the little open slot where you can put the cable?)
Author:  Dualscreenman [ Tue Apr 24, 2007 3:22 pm ]
Post subject: 
The drivers are on the CD, afaik.
Page 1 of 10 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/